ORTON HD X403p Satellite Receiver
ORTON HD X403p - HDTV satellite receiver from ORTON.
The receiver is a complete analog receiver Globo HD X403p (Opticum HD X403p).
Such a receiver - AMIKO SHD-8000.
Satellite receiver ORTON HD X403p made on the basis of the latest powerful processor ALI 3602 and receives:
SD channels in MPEG-2 and MPEG-4;
HDTV channels (DVB-S2/H.264) with a resolution of up to 1080i.
Satellite receiver ORTON HD X403p is simple to set up. Menu of the receiver will not cause any problems even for a beginner. ORTON HD X403p receiver is small in size and has a card slot supporting cards in encodings DRE Crypt, Viaccess and Irdeto. Thanks CI slot can connect CAM-modules. We note a HDMI output for digital audio and video signals, which works simultaneously with SCART-connector. The receiver has an Ethernet port, which allows the receiver to connect to the Internet and gives it additional capabilities.
Receiver copes with taking various "difficult" signals - c lower value Symbol Rate - 4W, 11654H, DVB-S2, SR 2000 and a high SR - 53E, 11044V, SR 44950. Also normally accepted audio format AAC. There is support for DiSEqC 1.0, 1.1, 1.2 and USALS.
Via USB 2.0 interface is implemented PVR functional unit. With ORTON HD X403p possible to record one channel while viewing another from the same transponder. Receiver supports the Time Shift - Pause a channel, and then playing it left off. With an external drive, you can view video in MPG, as well as to listen to music and view photos.
Specifications ORTON HD X403p:
Frequency Range - 950 - 2150MHz
Signal level - from -25 to-65dBm
DiSEqC control - 1.0; 1.1; 1.2/USALS
Modulation - DVB-S, DVB-S2 (QPSK, 8PSK)
Video - MPEG-2, MPEG4 AVC/H.264 HP @ L4
Resolution - 576i, 576p, 720p, 1080i
Electronic Programme Guide - EPG
Power supply - 100-250V 50/60Hz
Front panel ORTON HD X403p:
CI - jack for CAM modules
CA - card reader
Rear panel ORTON HD X403p:
LNB IN - LNB satellite dish connection
LOOP - through output for connecting another receiver
HDMI - Connecting the TV to the digital output
RCA audio L + R out - connect audio devices
CVBS - connected video device (composite)
TV SCART - TV connection
S / PDIF (coaxial) - a digital audio receiver connection 05.01
RS-232 - connection to COM-port
Ethernet - to connect to the local network and the Internet
USB 2.0 - to implement PVR functions
12V 50mA - connector for external power input
Trim ORTON HD X403p:
Receiver ORTON HD X403p